Double Diaphragm Pulse Valve Solenoid Pulse Valve QG-Z-50S / 62S / 76S Series GOYEN Type

Product Description

Double Diaphragm Pulse Valve , Solenoid Pulse Valve QG-Z-50S / 62S / 76S Series GOYEN Type

 

 

 

GOYEN Similar Type

Right angle

---

Ambient Temperature : -25~60℃ Customized for lower or higher temperature

Relative Humidity : ≤85%

Working Medium : Clean Air

Voltage : AC220V/DC24V/AC110V/AC24V Customized

Protection Class : IP65

Diaphragm Life : Over One Million Cycles

Cv/Kv : Call us for detail

 

---

Material Construction                                                                                                                                     

 

Body : ADC12 die cast

Armature : 430 FR stainless steel

Diaphragm : Nitrile or Viton

Spring : 321 stainless steel

Fasteners : 302 stainless steel

 

---

Common failure and troubleshooting                                                                                                      

 

During installation and commissioning

 

Failure phenomena

 

1 . The valves cannot all be opened, but the leading part does act.

2 . Some valves do not work, but the others are normal.

3 . The valves cannot all be closed. There is leakage. There is no way to establish a gas dome.

4 . Some valves cannot be closed. There is leakage.

5 . A valve closing is slowly.

 

Possible Reason

 

1 . Check the gas dome pressure to see if it is too low.

2 . Check the valve coil connection and coil

3 ( 1 ) . Y-valve. Some valves for the same gas dome are leaking, thus causing leakage for all the valves.

3 ( 2 ) . Z-valve. The valve inlet and blowing muzzle are installed backwards.

4 . There is some dirt or debris on the membrane, ii is blocking the moving iron core.

5 . The membrane orifice is blocked.

 

Troubleshooting

 

1 . Check the leakage

2 . Replace the accessories

3 ( 1 ) . Check the leakage

3 ( 2 ) . Re-install

4 . Clean the membrane and check that the membrane is complete. Check the moving iron core and air lock.

5 . Dredge the membrane orifice

 

---

During use period

 

Failure phenomena

 

1 . Some valves are leaking. The membrane cannot close tightly and the valve is always open a

little.

2 . Coil is hot and burned out.

3 . Voltage exists but the valve does not operate.

4 . Ambient temperature is below -20℃. The valve is leaking and cannot open.

 

Possible Reason

 

1 . There is some dirt or debris on the membrane, the leading part is damaged. Moving iron core is blocked.

2 . It has been turned on for too long.

3 . Membrane is damaged and the orifice is blocked.

4 . Ambient temperature is too low and here is frost in the valve.

 

Troubleshooting

 

1 . Clean the membrane and check that the membrane piece is complete. Check the moving iron core and the air lock. Replace the accessories if necessary.

2 . Check the working condition of the control system.

3 . Replace the accessories in time.

4 . Pay attention to insulation and maintaining proper temperatures.

---

Why choose us                                                                                                                                              

1: Various style for each products and completely series pneumatic products .
2: Large stock for fast shipping .
3: High quality with competitive price .
4: Sample order & small quantity order is acceptable .

5: Reliable quality assured and active after-sell service
6: One year quality guarantee

---

FAQ                                                                                                                                                              

 

Q: How much is our minimum order quantity ?
A: Our minimun quantity is 1 Piece .

 

Q: Could you offer the free samples ?
A: Yeah, we could offer the free samples based on special customer.pre-production sample,production sample.

 

Q: What ' s your business scope ?
A: Our business scope is SMC type high quality cylinder , air source treatment , solenoid valve ,water valve,steam valve, mechnical valve ,foot valve,angle seat valve,anti-explosion valve,pluse vlave, pneumatic valve ,hydraulic ball valve,hydraulic ss ball valve,hydraulic check valve,hydraulic solenoid valve ,all type of coil,lubrication pump and parts,SS316 fitting,quick coupler , etc .

 

Q: Do your company have specialized technical personnel ?
A: Design as your requirements,and have QC for make 100% inspection

 

Q: Can the product be made with our logo and brand ?
A: Yes , of course , we can make . we are OEM supplier for years and professional to make . But you need give us the authorization for work.

 

---